delete

Significance of Drywall Sanding

If you bought a house, chances are the walls are made of drywall. You might opt to install tiles or utilize flat paint to design them. Every wall décor idea is welcomed. Unfortunately, you have to guarantee that the drywall installation is properly done to avoid any problems.

One of the things to think about is sanding the drywall. It’s one of the most important steps in properly installing the drywall. If proper sanding is neglected, imperfections would keep you from styling your house.

Today, we’re going to discuss the significance of drywall sanding during the drywall installation Spokane phase.

What is Drywall Sanding?

To hide any imperfections, nicks, scratches, interior angles, and joints, a drywall contractor will have to apply a joint compound during the finishing stage.

Whenever joints and cracks are covered with the compound, the area needs to be sanded. This helps to prevent any levels that are not even when the project is done. Sometimes, sanding requires a lot of attention since several dents are too complicated to smoothen without etching the surface. These scratches can show up under a thin layer or flat or gloss paint.

Wet Drywall Sanding

The advantage of this type of drywall sanding method is that it doesn’t leave dust behind. Therefore, it doesn’t require extensive cleanup after. However, there’s one drawback to wet drywall sanding. The outcomes would not be similar. It is simple to think about the difference if you know the tool utilized in wet drywall sanding. For those who don’t know, contractors use a sponge. A simple cloth will also be used if you need a slightly sand surface.

This type of drywall sanding method is best if you’re planning to cover the wall with wallpaper, wainscoting, and tiles. If you’re planning to apply semi-gloss, flat, or gloss paint, it isn’t the ideal method. The reason for this is that imperfections will be obvious.

Dry Drywall Sanding

This is the most common method utilized in sanding the drywall. A professional contractor will utilize a sander to smoothen the surface of the drywall due to the imperfections made by the joint compound. Unlike wet drywall sanding, this method is quite messy since it leaves dust behind. It also takes a lot of time because the contractor has to focus to avoid scratching the surface.

Be Ready for Drywall Sanding and Repair

You shouldn’t forget that drywall cracks and holes are common issues. It takes a couple of hits and picture frames to create several holes around the wall. If you want to renovate your living room or redecorate your kitchen, you will have to fix these imperfections first. Fortunately, it’s a lot easier. All you need is a joint compound to fill the cracks and holes. Then, you have to sand the drywall to smoothen the area before applying the paint.

To make things simple, sanding is necessary to achieve a smooth surface ready for styling. However, you should be wary of what method you should choose for sanding the drywall. The best thing you can do is to hire a professional drywall contractor to do the job for you.